Guix on Android!
Last year I thought to myself: since my phone is just a computer running an operating system called Android (or Replicant!), and that Android is based on a Linux kernel, it's just another foreign distribution I could install GNU Guix on, right? It turned out it was absolutely the case. Today I was reminded on IRC of my attempt last year at installing GNU Guix on my phone. Hence this blog post. I'll try to give you all the knowledge and commands required to install it on your own Android device.
First of all, you will need an Android or Replicant device. Just like any
installation of GNU Guix, you will need root access on that device.
Unfortunately, in the Android world this is not very often the case by
default. Then, you need a cable to connect your computer to your phone.
Once the hardware is in place, you will need
adb (the Android
guix package -i adb
Exploring the device
Every Android device has its own partioning layout, but basically it works like this:
- A boot partition for booting the device
- A recovery partition for booting the device in recovery mode
- A data partition for user data, including applications, the user home, etc
- A system partition with the base system and applications. This is the place where phone companies put their own apps so you can't remove them
- A vendor partition for drivers
- Some other partitions
During the boot process, the bootloader looks for the boot partition.
It doesn't contain a filesystem, but only a gzipped cpio archive (the
initramfs) and the kernel. The bootloader loads them in memory and
the kernel starts using the initramfs. Then, the init system from this
initramfs loads partitions in their respective directories: the system
/system, the vendor partition in
/vendor and the data
/data. Other partitions may be loaded.
And that's it. Android's root filesystem is actually the initramfs so any modification to its content will be lost after a reboot. Thankfully(?), Android devices are typically not rebooted often.
Another issue is the Android C library (libc), called Bionic: it has less functionality and works completely differently from the GNU libc. Since Guix is built with the Glibc, we will need to do something to make it work on our device.
Installing the necessary files
We will follow the binary installation guide. My hardware is aarch64, so I download the corresponding binary release.
Now it's time to start using adb. Connect your device and obtain root priviledges for adb. You may have to authorize root access to the computer from your phone:
Now, we will transfer some necessary files:
adb push guix-binary-* /data # Glibc needs these two files for networking. adb push /etc/protocols /system/etc/ adb push /etc/services /system/etc/ # … and this one to perform DNS queries. You probably need # to change nameservers if you use mobile data. adb push /etc/resolv.conf /system/etc/
Note that some devices may not have
/system/etc available. In that
/etc may be available. If none is available, create the
directory by using
adb shell to get a shell on your device, then
push the files to that new directory.
Installing Guix itself
Now all the necessary files are present on the device, so we can connect to a shell on the device:
From that shell, we will install Guix. The root filesystem is mounted read-only as it doesn't make sense to modify it. Remember: it's a RAM filesystem. Remount-it read-write and create necessary directories:
mount -o remount,rw / mkdir /gnu /var mount -o remount,ro /
Now, we can't just copy the content of the binary archive to these
folders because the initramfs has a limited amount of space. Guix
/gnu/store is a symlink. One solution consists in
installing the content of the binary tarball on an existing partition
(because you can't modify the partition layout easily) that has enough
free space, typically the data partition. Then this partition is mounted
Before that, you will need to find out what the data partition is in
your system. Simply run
mount | grep /data to see what partition
We mount the partition, extract the tarball and move the contents to their final location:
mount /dev/block/bootdevice/by-name/userdata /gnu mount /dev/block/bootdevice/by-name/userdata /var cd /data tar xf guix-binary-... mv gnu/store . mv var/guix . rmdir gnu rmdir var
Finally, we need to create users and groups for Guix to work
properly. Since Bionic doesn't use
to store the users, we need to create them from scratch. Note
the addition of the root user and group, as well as the
# create guix users and root for glibc cat > /etc/passwd << EOF root:x:0:0:root:/data:/sbin/sh nobody:x:99:99:nobody:/:/usr/bin/nologin guixbuilder01:x:994:994:Guix build user 01:/var/empty:/usr/bin/nologin guixbuilder02:x:993:994:Guix build user 02:/var/empty:/usr/bin/nologin guixbuilder03:x:992:994:Guix build user 03:/var/empty:/usr/bin/nologin guixbuilder04:x:991:994:Guix build user 04:/var/empty:/usr/bin/nologin guixbuilder05:x:990:994:Guix build user 05:/var/empty:/usr/bin/nologin guixbuilder06:x:989:994:Guix build user 06:/var/empty:/usr/bin/nologin guixbuilder07:x:988:994:Guix build user 07:/var/empty:/usr/bin/nologin guixbuilder08:x:987:994:Guix build user 08:/var/empty:/usr/bin/nologin guixbuilder09:x:986:994:Guix build user 09:/var/empty:/usr/bin/nologin guixbuilder10:x:985:994:Guix build user 10:/var/empty:/usr/bin/nologin EOF cat > /etc/group << EOF root:x:0:root guixbuild:x:994:guixbuilder01,guixbuilder02,guixbuilder03,guixbuilder04,guixbuilder05,guixbuilder06,guixbuilder07,guixbuilder08,guixbuilder09,guixbuilder10 EOF
First, we install the root profile somewhere:
export HOME=/data ln -sf /var/guix/profiles/per-user/root/guix-profile \ $HOME/.guix-profile
Now we can finally run the Guix daemon. Chrooting is impossible on my device so I had to disable it:
export PATH="$HOME/.guix-profile/bin:$HOME/.guix-profile/sbin:$PATH" guix-daemon --build-users-group=guixbuild --disable-chroot &
To finish with, it's a good idea to allow substitutes from hydra:
mkdir /etc/guix guix archive --authorize < \ $HOME/.guix-profile/share/guix/hydra.gnu.org.pub
So, now we can enjoy the Guix package manager on Android! One of the
drawbacks is that after a reboot we will have to redo half of the
/gnu, mount the partitions to them. Everytime
you launch a shell, you will have to export the
PATH to be able to run
guix. You will have to run
guix-daemon manually. To solve all of these
problems at once, you should modify the boot image. That's tricky and I
already put some effort to it, but the phone always ends up in a boot
loop after I flash a modified boot image. The nice folks at
suggested that I soldered some cable to access a serial console where
debug messages may be dropped. Let's see how many fingers I burn before
I can boot a custom boot image!
About GNU Guix
GNU Guix is a transactional package manager for the GNU system. The Guix System Distribution or GuixSD is an advanced distribution of the GNU system that relies on GNU Guix and respects the user's freedom.
In addition to standard package management features, Guix supports transactional upgrades and roll-backs, unprivileged package management, per-user profiles, and garbage collection. Guix uses low-level mechanisms from the Nix package manager, except that packages are defined as native Guile modules, using extensions to the Scheme language. GuixSD offers a declarative approach to operating system configuration management, and is highly customizable and hackable.
GuixSD can be used on an i686, x86_64 and armv7 machines. It is also possible to use Guix on top of an already installed GNU/Linux system, including on mips64el and aarch64.
달리 명시되지 않는 한, 이와 같은 사이트의 블로그 게시물은 해당 작성자에게 저작권이 있고 CC-BY-SA 4.0 라이선스 및 GNU 자유 문서 라이선스 (버전 1.3 이상, 고정 부분 없음, 앞-표지 텍스트 없음, 뒤-표지 텍스트 없음)의 조건에 따라 게시됩니다.