Next: Запланированное исполнения задач, Up: Сервисы [Contents][Index]
The (gnu services base) module provides definitions for the basic
services that one expects from the system. The services exported by this
module are listed below.
This variable contains a list of basic services (see Типы сервисов и сервисы, for more information on service objects) one would expect from the system: a login service (mingetty) on each tty, syslogd, the libc name service cache daemon (nscd), the udev device manager, and more.
This is the default value of the services field of
operating-system declarations. Usually, when customizing a system,
you will want to append services to %base-services, like this:
This is the service that sets up “special files” such as /bin/sh;
an instance of it is part of %base-services.
The value associated with special-files-service-type services must be
a list of two-element lists where the first element is the “special file”
and the second element is its target. By default it is:
`(("/bin/sh" ,(file-append bash "/bin/sh")) ("/usr/bin/env" ,(file-append coreutils "/bin/env")))
If you want to add, say, /bin/bash to your system, you can change it
to:
`(("/bin/sh" ,(file-append bash "/bin/sh")) ("/usr/bin/env" ,(file-append coreutils "/bin/env")) ("/bin/bash" ,(file-append bash "/bin/bash")))
Since this is part of %base-services, you can use
modify-services to customize the set of special files (see modify-services). But the simple way to add a special
file is via the extra-special-file procedure (see below).
Use target as the “special file” file.
For example, adding the following lines to the services field of your
operating system declaration leads to a /usr/bin/env symlink:
(extra-special-file "/usr/bin/env"
(file-append coreutils "/bin/env"))
This procedure is meant for /bin/sh, /usr/bin/env and similar
targets. In particular, use for targets under /etc might not work as
expected if the target is managed by Guix in other ways.
Type of the service that sets the system host name, whose value is a
string. This service is included in operating-system by default
(see essential-services).
Install the given fonts on the specified ttys (fonts are per virtual console
on the kernel Linux). The value of this service is a list of tty/font
pairs. The font can be the name of a font provided by the kbd
package or any valid argument to setfont, as in this example:
`(("tty1" . "LatGrkCyr-8x16") ("tty2" . ,(file-append font-tamzen "/share/kbd/consolefonts/TamzenForPowerline10x20.psf")) ("tty3" . ,(file-append font-terminus "/share/consolefonts/ter-132n"))) ; for HDPI
Type of the service that populates the entries for (/etc/hosts).
This service type can be extended by passing it a list of host
records.
The example below shows how to add two entries to /etc/hosts:
(simple-service 'add-extra-hosts
hosts-service-type
(list (host "192.0.2.1" "example.com"
'("example.net" "example.org"))
(host "2001:db8::1" "example.com"
'("example.net" "example.org"))))
Примечание: By default /etc/hosts comes with the following entries:
127.0.0.1 localhost host-name ::1 localhost host-nameFor most setups this is what you want though if you find yourself in the situation where you want to change the default entries, you can do so in
operating-systemviamodify-services(seemodify-services).The following example shows how to unset host-name from being an alias of
localhost.(operating-system ;; … (essential-services (modify-services (operating-system-default-essential-services this-operating-system) (hosts-service-type config => (list (host "127.0.0.1" "localhost") (host "::1" "localhost"))))))
Return a new record for the host at address with the given canonical-name and possibly aliases.
address must be a string denoting a valid IPv4 or IPv6 address, and canonical-name and the strings listed in aliases must be valid host names.
Type of the service that provides a console login service, whose value is a
<login-configuration> object.
Data type representing the configuration of login, which specifies the MOTD (message of the day), among other things.
motd ¶A file-like object containing the “message of the day”.
allow-empty-passwords? (default: #t)Allow empty passwords by default so that first-time users can log in when the ’root’ account has just been created.
Type of the service that runs Mingetty, an implementation of the virtual
console log-in. The value for this service is a
<mingetty-configuration> object.
Data type representing the configuration of Mingetty, which specifies the tty to run, among other things.
ttyThe name of the console this Mingetty runs on—e.g., "tty1".
auto-login (default: #f)When true, this field must be a string denoting the user name under which
the system automatically logs in. When it is #f, a user name and
password must be entered to log in.
login-program (default: #f)This must be either #f, in which case the default log-in program is
used (login from the Shadow tool suite), or a gexp denoting the
name of the log-in program.
login-pause? (default: #f)When set to #t in conjunction with auto-login, the user will
have to press a key before the log-in shell is launched.
port (default: 22)When set to #t, the screen will be cleared before showing the login
prompt. The field name is bit unfortunate, since it controls clearing also
before the initial login, not just after a logout.
delay (default: #f)When set to a number, sleep that many seconds after startup.
print-issue (default: #t)When set to #t, write out a new line and the content of
/etc/issue. Value of 'no-nl can be used to suppress the new
line.
print-hostname (default: #t)When set to #t, print the host name before the login prompt. The
host name is printed up to the first dot. Can be set to 'long to
print the full host name.
nice (default: #f)When set to a number, change the process priority using nice.
working-directory (default: #f)When set to a string, change into that directory before calling the login program.
root-directory (default: #f)When set to a string, use this directory at the process’s root directory.
shepherd-requirementList of shepherd requirements. Unless you know what you are doing, it is recommended to extend the default list instead of overriding it.
As an example, when using auto-login on a system with elogind, it is
necessary to wait on the 'dbus-system service:
(modify-services %base-services
(mingetty-service-type config =>
(mingetty-configuration
(inherit config)
;; Automatically log in as "guest".
(auto-login "guest")
(shepherd-requirement
(cons 'dbus-system
(mingetty-configuration-shepherd-requirement
config))))))
mingetty (default: mingetty)The Mingetty package to use.
Type of the service that runs agetty, which implements virtual and serial
console log-in. The value for this service is a
<agetty-configuration> object.
Data type representing the configuration of agetty, which specifies the tty to run, among other things33.
ttyThe name of the console this agetty runs on, as a string—e.g.,
"ttyS0". This argument is optional, it will default to a reasonable
default serial port used by the kernel Linux.
For this, if there is a value for an option agetty.tty in the kernel
command line, agetty will extract the device name of the serial port from it
and use that.
If not and if there is a value for an option console with a tty in
the Linux command line, agetty will extract the device name of the serial
port from it and use that.
In both cases, agetty will leave the other serial device settings (baud rate etc.) alone—in the hope that Linux pinned them to the correct values.
baud-rate (default: #f)A string containing a comma-separated list of one or more baud rates, in descending order.
term (default: #f)A string containing the value used for the TERM environment variable.
eight-bits? (default: #f)When #t, the tty is assumed to be 8-bit clean, and parity detection
is disabled.
auto-login (default: #f)When passed a login name, as a string, the specified user will be logged in automatically without prompting for their login name or password.
no-reset? (default: #f)When #t, don’t reset terminal cflags (control modes).
host (default: #f)This accepts a string containing the “login_host”, which will be written into the /var/run/utmpx file.
remote? (default: #f)When set to #t in conjunction with host, this will add an
-r fakehost option to the command line of the login program specified
in login-program.
flow-control? (default: #f)When set to #t, enable hardware (RTS/CTS) flow control.
no-issue? (default: #f)When set to #t, the contents of the /etc/issue file will not
be displayed before presenting the login prompt.
init-string (default: #f)This accepts a string that will be sent to the tty or modem before sending anything else. It can be used to initialize a modem.
no-clear? (default: #f)When set to #t, agetty will not clear the screen before showing the
login prompt.
login-program (default: (file-append shadow "/bin/login"))This must be either a gexp denoting the name of a log-in program, or unset,
in which case the default value is the login from the Shadow tool
suite.
local-line (default: #f)Control the CLOCAL line flag. This accepts one of three symbols as
arguments, 'auto, 'always, or 'never. If #f,
the default value chosen by agetty is 'auto.
extract-baud? (default: #f)When set to #t, instruct agetty to try to extract the baud rate from
the status messages produced by certain types of modems.
skip-login? (default: #f)When set to #t, do not prompt the user for a login name. This can be
used with login-program field to use non-standard login systems.
no-newline? (default: #f)When set to #t, do not print a newline before printing the
/etc/issue file.
login-options (default: #f)This option accepts a string containing options that are passed to the login program. When used with the login-program, be aware that a malicious user could try to enter a login name containing embedded options that could be parsed by the login program.
login-pause (default: #f)When set to #t, wait for any key before showing the login prompt.
This can be used in conjunction with auto-login to save memory by
lazily spawning shells.
chroot (default: #f)Change root to the specified directory. This option accepts a directory path as a string.
hangup? (default: #f)Use the Linux system call vhangup to do a virtual hangup of the
specified terminal.
keep-baud? (default: #f)When set to #t, try to keep the existing baud rate. The baud rates
from baud-rate are used when agetty receives a BREAK character.
timeout (default: #f)When set to an integer value, terminate if no user name could be read within timeout seconds.
detect-case? (default: #f)When set to #t, turn on support for detecting an uppercase-only
terminal. This setting will detect a login name containing only uppercase
letters as indicating an uppercase-only terminal and turn on some
upper-to-lower case conversions. Note that this will not support Unicode
characters.
wait-cr? (default: #f)When set to #t, wait for the user or modem to send a carriage-return
or linefeed character before displaying /etc/issue or login prompt.
This is typically used with the init-string option.
no-hints? (default: #f)When set to #t, do not print hints about Num, Caps, and Scroll locks.
no-hostname? (default: #f)By default, the hostname is printed. When this option is set to #t,
no hostname will be shown at all.
long-hostname? (default: #f)By default, the hostname is only printed until the first dot. When this
option is set to #t, the fully qualified hostname by
gethostname or getaddrinfo is shown.
erase-characters (default: #f)This option accepts a string of additional characters that should be interpreted as backspace when the user types their login name.
kill-characters (default: #f)This option accepts a string that should be interpreted to mean “ignore all previous characters” (also called a “kill” character) when the user types their login name.
chdir (default: #f)This option accepts, as a string, a directory path that will be changed to before login.
delay (default: #f)This options accepts, as an integer, the number of seconds to sleep before opening the tty and displaying the login prompt.
nice (default: #f)This option accepts, as an integer, the nice value with which to run the
login program.
extra-options (default: '())This option provides an “escape hatch” for the user to provide arbitrary
command-line arguments to agetty as a list of strings.
shepherd-requirement (default: '())The option can be used to provides extra shepherd requirements (for example
'syslogd) to the respective 'term-* shepherd service.
Type of the service that runs
kmscon, which
implements virtual console log-in. The value for this service is a
<kmscon-configuration> object.
Data type representing the configuration of Kmscon, which specifies the tty to run, among other things.
virtual-terminalThe name of the console this Kmscon runs on—e.g., "tty1".
login-program (default: #~(string-append #$shadow "/bin/login"))A gexp denoting the name of the log-in program. The default log-in program
is login from the Shadow tool suite.
login-arguments (default: '("-p"))A list of arguments to pass to login.
auto-login (default: #f)When passed a login name, as a string, the specified user will be logged in automatically without prompting for their login name or password.
hardware-acceleration? (default: #f)Whether to use hardware acceleration.
speed (default: 1.0)Font engine used in Kmscon.
port (default: 22)Font size used in Kmscon.
keyboard-layout (default: #f)If this is #f, Kmscon uses the default keyboard layout—usually US
English (“qwerty”) for a 105-key PC keyboard.
Otherwise this must be a keyboard-layout object specifying the
keyboard layout. See Раскладка клавиатуры, for more information on how to
specify the keyboard layout.
kmscon (default: kmscon)The Kmscon package to use.
Type of the service that runs the libc nscd (name service cache
daemon), whose value is an <nscd-configuration> object.
For convenience, the Shepherd service for nscd provides the following actions:
invalidate ¶This invalidate the given cache. For instance, running:
herd invalidate nscd hosts
invalidates the host name lookup cache of nscd.
statisticsRunning herd statistics nscd displays information about nscd usage
and caches.
Data type representing the nscd (name service cache daemon) configuration.
name-services (default: '())List of packages denoting name services that must be visible to the
nscd—e.g., (list nss-mdns).
glibc (default: glibc)Package object denoting the GNU C Library providing the nscd
command.
log-file (default: #f)Name of the nscd log file. Debugging output goes to that file when
debug-level is strictly positive, or to standard error if it is
#f. Regular messages are written to syslog when debug-level
is zero, regardless of the value of log-file.
debug-level (default: 0)Integer denoting the debugging levels. Higher numbers mean that more debugging output is logged.
port (default: 22)List of <nscd-cache> objects denoting things to be cached; see below.
Data type representing a cache database of nscd and its parameters.
databaseThis is a symbol representing the name of the database to be cached. Valid
values are passwd, group, hosts, and services,
which designate the corresponding NSS database (see NSS Basics in The GNU C Library Reference Manual).
positive-time-to-livenegative-time-to-live (default: 20)A number representing the number of seconds during which a positive or negative lookup result remains in cache.
check-files? (default: #t)Whether to check for updates of the files corresponding to database.
For instance, when database is hosts, setting this flag
instructs nscd to check for updates in /etc/hosts and to take them
into account.
persistent? (default: #t)Whether the cache should be stored persistently on disk.
shared? (default: #t)Whether the cache should be shared among users.
max-database-size (default: 32 MiB)Maximum size in bytes of the database cache.
List of <nscd-cache> objects used by default by
nscd-configuration (see above).
It enables persistent and aggressive caching of service and host name lookups. The latter provides better host name lookup performance, resilience in the face of unreliable name servers, and also better privacy—often the result of host name lookups is in local cache, so external name servers do not even need to be queried.
Type of the service that runs the syslog daemon, whose value is a
<syslog-configuration> object.
To have a modified syslog-configuration come into effect after
reconfiguring your system, the ‘reload’ action should be preferred to
restarting the service, as many services such as the login manager depend on
it and would be restarted as well:
# herd reload syslog
which will cause the running syslogd process to reload its
configuration.
Data type representing the configuration of the syslog daemon.
syslogd (default: #~(string-append #$inetutils "/libexec/syslogd"))The syslog daemon to use.
config-file (default: %default-syslog.conf)The syslog configuration file to use. See syslogd invocation in GNU Inetutils, for more information on the configuration file syntax.
This is the type of the service that runs the build daemon,
guix-daemon (see Вызов guix-daemon). Its value must be a
guix-configuration record as described below.
This data type represents the configuration of the Guix build daemon.
See Вызов guix-daemon, for more information.
guix (default: guix)The Guix package to use. See Customizing the System-Wide Guix to learn how to provide a package with a pre-configured set of channels.
build-group (default: "guixbuild")Name of the group for build user accounts.
build-accounts (default: 10)Number of build user accounts to create.
authorize-key? (default: #t) ¶Whether to authorize the substitute keys listed in
authorized-keys—by default that of
bordeaux.guix.gnu.org and ci.guix.gnu.org
(see Подстановки).
When authorize-key? is true, /etc/guix/acl cannot be changed
by invoking guix archive --authorize. You must instead adjust
guix-configuration as you wish and reconfigure the system. This
ensures that your operating system configuration file is self-contained.
Примечание: When booting or reconfiguring to a system where
authorize-key?is true, the existing /etc/guix/acl file is backed up as /etc/guix/acl.bak if it was determined to be a manually modified file. This is to facilitate migration from earlier versions, which allowed for in-place modifications to /etc/guix/acl.
port (default: 22)The list of authorized key files for archive imports, as a list of
string-valued gexps (see Вызов guix archive). By default, it
contains that of bordeaux.guix.gnu.org and
ci.guix.gnu.org (see Подстановки). See
substitute-urls below for an example on how to change it.
use-substitutes? (default: #t)Whether to use substitutes.
port (default: 22)The list of URLs where to look for substitutes by default.
Suppose you would like to fetch substitutes from guix.example.org in
addition to bordeaux.guix.gnu.org. You will need to do two
things: (1) add guix.example.org to substitute-urls, and (2)
authorize its signing key, having done appropriate checks (see Авторизация сервера подстановок). The configuration below does exactly that:
(guix-configuration
(substitute-urls
(append (list "https://guix.example.org")
%default-substitute-urls))
(authorized-keys
(append (list (local-file "./guix.example.org-key.pub"))
%default-authorized-guix-keys)))
This example assumes that the file ./guix.example.org-key.pub
contains the public key that guix.example.org uses to sign
substitutes.
generate-substitute-key? (default: #t)Whether to generate a substitute key pair under /etc/guix/signing-key.pub and /etc/guix/signing-key.sec if there is not already one.
This key pair is used when exporting store items, for instance with
guix publish (see Вызов guix publish) or guix
archive (see Вызов guix archive). Generating a key pair takes a few
seconds when enough entropy is available and is only done once; you might
want to turn it off for instance in a virtual machine that does not need it
and where the extra boot time is a problem.
channels (default: #f)List of channels to be specified in /etc/guix/channels.scm, which is
what guix pull uses by default (see Вызов guix pull).
Примечание: When reconfiguring a system, the existing /etc/guix/channels.scm file is backed up as /etc/guix/channels.scm.bak if it was determined to be a manually modified file. This is to facilitate migration from earlier versions, which allowed for in-place modifications to /etc/guix/channels.scm.
max-silent-time (default: 3600)timeout (default: (* 3600 24))The number of seconds of silence and the number of seconds of activity, respectively, after which a build process times out. A value of zero disables the timeout.
log-compression (default: 'gzip)The type of compression used for build logs—one of gzip,
bzip2, or none.
features (default: '())Следует ли обнаруживать сервера с заменителями в локальной сети с помощью mDNS and DNS-SD.
build-machines (default: #f)This field must be either #f or a list of gexps evaluating to a
build-machine record or to a list of build-machine records
(see Использование функционала разгрузки).
When it is #f, the /etc/guix/machines.scm file is left
untouched. Otherwise, the list of of gexps is written to
/etc/guix/machines.scm; if a previously-existing file is found, it is
backed up as /etc/guix/machines.scm.bak. This allows you to declare
build machines for offloading directly in the operating system declaration,
like so:
(guix-configuration
(build-machines
(list #~(build-machine (name "foo.example.org") …)
#~(build-machine (name "bar.example.org") …))))
Additional build machines may be added via the guix-extension
mechanism (see below).
extra-options (default: '())List of extra command-line options for guix-daemon.
log-file (default: "/var/log/guix-daemon.log")File where guix-daemon’s standard output and standard error are
written.
http-proxy (default: #f)The URL of the HTTP and HTTPS proxy used for downloading fixed-output derivations and substitutes.
It is also possible to change the daemon’s proxy at run time through the
set-http-proxy action, which restarts it:
herd set-http-proxy guix-daemon http://localhost:8118
To clear the proxy settings, run:
herd start ssh-daemon
tmpdir (default: #f)A directory path where the guix-daemon will perform builds.
environment (default: '())Environment variables to be set before starting the daemon, as a list of
key=value strings.
socket-directory-permissions (default: #o755)Permissions to set for the directory /var/guix/daemon-socket. This,
together with socket-directory-group and
socket-directory-user, determines who can connect to the build daemon
via its Unix socket. TCP socket operation is unaffected by these.
socket-directory-user (default: #f)socket-directory-group (default: #f)User and group owning the /var/guix/daemon-socket directory or
#f to keep the user or group as root.
This data type represents the parameters of the Guix build daemon that are extendable. This is the type of the object that must be used within a guix service extension. See Структура сервисов, for more information.
authorized-keys (default: '())A list of file-like objects where each element contains a public key.
substitute-urls (default: '())A list of strings where each element is a substitute URL.
build-machines (default: '())A list of gexps that evaluate to build-machine records or to a list
of build-machine records. (see Использование функционала разгрузки).
Using this field, a service may add new build machines to receive builds
offloaded by the daemon. This is useful for a service such as
hurd-vm-service-type, which can make a GNU/Hurd virtual machine
directly usable for offloading (see hurd-vm-service-type).
chroot-directories (default: '())A list of file-like objects or strings pointing to additional directories the build daemon can use.
Type of the service that runs udev, a service which populates the
/dev directory dynamically, whose value is a
<udev-configuration> object.
Since the file names for udev rules and hardware description files matter, the configuration items for rules and hardware cannot simply be plain file-like objects with the rules content, because the name would be ignored. Instead, they are directory file-like objects that contain optional rules in lib/udev/rules.d and optional hardware files in lib/udev/hwdb.d. This way, the service can be configured with whole packages from which to take rules and hwdb files.
The udev-service-type can be extended with file-like
directories that respect this hierarchy. For convenience, the
udev-rule and file->udev-rule can be used to construct udev
rules, while udev-hardware and file->udev-hardware can be used
to construct hardware description files.
In an operating-system declaration, this service type can be
extended using procedures udev-rules-service and
udev-hardware-service.
Data type representing the configuration of udev.
udev (default: eudev) (type: file-like)Package object of the udev service. This package is used at run-time, when compiled for the target system. In order to generate the hwdb.bin hardware index, it is also used when generating the system definition, compiled for the current system.
rules (default: ’()) (type: list-of-file-like)List of file-like objects denoting udev rule files under a sub-directory.
hardware (default: ’()) (type: list-of-file-like)List of file-like objects denoting udev hardware description files under a sub-directory.
Return a udev-rule file named file-name containing the rules defined by the contents literal.
In the following example, a rule for a USB device is defined to be stored in the file 90-usb-thing.rules. The rule runs a script upon detecting a USB device with a given product identifier.
(define %example-udev-rule
(udev-rule
"90-usb-thing.rules"
(string-append "ACTION==\"add\", SUBSYSTEM==\"usb\", "
"ATTR{product}==\"Example\", "
"RUN+=\"/path/to/script\"")))
Return a udev hardware description file named file-name containing the hardware information contents.
Return a service that extends udev-service-type with rules and
account-service-type with groups as system groups. This works
by creating a singleton service type name-udev-rules, of which
the returned service is an instance.
Here we show how it can be used to extend udev-service-type with the
previously defined rule %example-udev-rule.
(operating-system
;; …
(services
(cons (udev-rules-service 'usb-thing %example-udev-rule)
%desktop-services)))
Return a service that extends udev-service-type with hardware.
The service name is name-udev-hardware.
Return a udev-rule file named file-name containing the rules defined within file, a file-like object.
The following example showcases how we can use an existing rule file.
(use-modules (guix download) ;for url-fetch (guix packages) ;for origin …) (define %android-udev-rules (file->udev-rule "51-android-udev.rules" (let ((version "20170910")) (origin (method url-fetch) (uri (string-append "https://raw.githubusercontent.com/M0Rf30/" "android-udev-rules/" version "/51-android.rules")) (sha256 (base32 "0lmmagpyb6xsq6zcr2w1cyx9qmjqmajkvrdbhjx32gqf1d9is003"))))))
Since guix package definitions can be included in rules in order to
use all their rules under the lib/udev/rules.d sub-directory, then in
lieu of the previous file->udev-rule example, we could have used the
android-udev-rules package which exists in Guix in the (gnu
packages android) module.
Return a udev hardware description file named file-name containing the rules defined within file, a file-like object.
The following example shows how to use the android-udev-rules package
so that the Android tool adb can detect devices without root
privileges. It also details how to create the adbusers group, which
is required for the proper functioning of the rules defined within the
android-udev-rules package. To create such a group, we must define
it both as part of the supplementary-groups of our
user-account declaration, as well as in the groups of the
udev-rules-service procedure.
(use-modules (gnu packages android) ;for android-udev-rules (gnu system shadow) ;for user-group …) (operating-system ;; … (users (cons (user-account ;; … (supplementary-groups '("adbusers" ;for adb "wheel" "netdev" "audio" "video"))))) ;; … (services (cons (udev-rules-service 'android android-udev-rules #:groups '("adbusers")) %desktop-services)))
Save some entropy in %random-seed-file to seed /dev/urandom
when rebooting. It also tries to seed /dev/urandom from
/dev/hwrng while booting, if /dev/hwrng exists and is
readable.
This is the name of the file where some random bytes are saved by urandom-seed-service to seed /dev/urandom when rebooting. It defaults to /var/lib/random-seed.
This is the type of the service that runs GPM, the general-purpose mouse daemon, which provides mouse support to the Linux console. GPM allows users to use the mouse in the console, notably to select, copy, and paste text.
The value for services of this type must be a gpm-configuration (see
below). This service is not part of %base-services.
Data type representing the configuration of GPM.
options (default: %default-gpm-options)Command-line options passed to gpm. The default set of options
instruct gpm to listen to mouse events on /dev/input/mice.
See Command Line in gpm manual, for more information.
gpm (default: gpm)The GPM package to use.
This is the service type for guix publish (see Вызов guix publish). Its value must be a guix-publish-configuration object, as
described below.
This assumes that /etc/guix already contains a signing key pair as
created by guix archive --generate-key (see Вызов guix archive). If that is not the case, the service will fail to start.
Data type representing the configuration of the guix publish service.
guix (default: guix)The Guix package to use.
port (default: 80)The TCP port to listen for connections.
host (default: "localhost")The host (and thus, network interface) to listen to. Use "0.0.0.0"
to listen on all the network interfaces.
features (default: '())When true, advertise the service on the local network via the DNS-SD protocol, using Avahi.
This allows neighboring Guix devices with discovery on (see
guix-configuration above) to discover this guix publish
instance and to automatically download substitutes from it.
compression-level (default: 3)This is a list of compression method/level tuple used when compressing substitutes. For example, to compress all substitutes with both lzip at level 7 and gzip at level 9, write:
'(("lzip" 7) ("gzip" 9))
Level 9 achieves the best compression ratio at the expense of increased CPU
usage, whereas level 1 achieves fast compression. See Вызов guix publish, for more information on the available compression methods and the
tradeoffs involved.
An empty list disables compression altogether.
nar-path (default: "nar")The URL path at which “nars” can be fetched. See --nar-path, for details.
cache (default: #f)When it is #f, disable caching and instead generate archives on
demand. Otherwise, this should be the name of a directory—e.g.,
"/var/cache/guix/publish"—where guix publish caches
archives and meta-data ready to be sent. See --cache, for more information on the tradeoffs involved.
workers (default: #f)When it is an integer, this is the number of worker threads used for
caching; when #f, the number of processors is used. See --workers, for more information.
port (default: 22)When cache is true, this is the maximum size in bytes of a store item
for which guix publish may bypass its cache in case of a cache
miss. See --cache-bypass-threshold, for
more information.
ttl (default: #f)When it is an integer, this denotes the time-to-live in seconds of the published archives. See --ttl, for more information.
negative-ttl (default: #f)When it is an integer, this denotes the time-to-live in seconds for the negative lookups. See --negative-ttl, for more information.
Type of the service that runs rng-tools rngd, whose value is an
<rngd-configuration> object.
Data type representing the configuration of rngd.
rng-tools (default: rng-tools) (type: file-like)Package object of the rng-tools rngd.
device (default: "/dev/hwrng") (type: string)Path of the device to add to the kernel’s entropy pool. The service will fail if device does not exist.
Type of the service that installs a configuration file for the
pam_limits module. The value for this service type is a list of
pam-limits-entry values, which can be used to specify ulimit
limits and nice priority limits to user sessions. By default, the
value is the empty list.
The following limits definition sets two hard and soft limits for all login
sessions of users in the realtime group:
(service pam-limits-service-type
(list
(pam-limits-entry "@realtime" 'both 'rtprio 99)
(pam-limits-entry "@realtime" 'both 'memlock 'unlimited)))
The first entry increases the maximum realtime priority for non-privileged processes; the second entry lifts any restriction of the maximum address space that can be locked in memory. These settings are commonly used for real-time audio systems.
Another useful example is raising the maximum number of open file descriptors that can be used:
(service pam-limits-service-type
(list
(pam-limits-entry "*" 'both 'nofile 100000)))
In the above example, the asterisk means the limit should apply to any
user. It is important to ensure the chosen value doesn’t exceed the maximum
system value visible in the /proc/sys/fs/file-max file, else the
users would be prevented from login in. For more information about the
Pluggable Authentication Module (PAM) limits, refer to the ‘pam_limits’
man page from the linux-pam package.
greetd is a minimal
and flexible login manager daemon, that makes no assumptions about what you
want to launch.
If you can run it from your shell in a TTY, greetd can start it. If it can be taught to speak a simple JSON-based IPC protocol, then it can be a geeter.
greetd-service-type provides necessary infrastructure for logging in
users, including:
greetd PAM service
pam-mount to mount XDG_RUNTIME_DIR
Here is an example of switching from mingetty-service-type to
greetd-service-type, and how different terminals could be:
(append
(modify-services %base-services
;; greetd-service-type provides "greetd" PAM service
(delete login-service-type)
;; and can be used in place of mingetty-service-type
(delete mingetty-service-type))
(list
(service greetd-service-type
(greetd-configuration
(terminals
(list
;; we can make any terminal active by default
(greetd-terminal-configuration (terminal-vt "1") (terminal-switch #t))
;; we can make environment without XDG_RUNTIME_DIR set
;; even provide our own environment variables
(greetd-terminal-configuration
(terminal-vt "2")
(default-session-command
(greetd-agreety-session
(extra-env '(("MY_VAR" . "1")))
(xdg-env? #f))))
;; we can use different shell instead of default bash
(greetd-terminal-configuration
(terminal-vt "3")
(default-session-command
(greetd-agreety-session (command (file-append zsh "/bin/zsh")))))
;; we can use any other executable command as greeter
(greetd-terminal-configuration
(terminal-vt "4")
(default-session-command (program-file "my-noop-greeter" #~(exit))))
(greetd-terminal-configuration (terminal-vt "5"))
(greetd-terminal-configuration (terminal-vt "6"))))))
;; mingetty-service-type can be used in parallel
;; if needed to do so, do not (delete login-service-type)
;; as illustrated above
#| (service mingetty-service-type (mingetty-configuration (tty "tty8"))) |#))
Configuration record for the greetd-service-type.
motdA file-like object containing the “message of the day”.
allow-empty-passwords? (default: #t)Allow empty passwords by default so that first-time users can log in when the ’root’ account has just been created.
terminals (default: '())List of greetd-terminal-configuration per terminal for which
greetd should be started.
greeter-supplementary-groups (default: '())List of groups which should be added to greeter user. For instance:
(greeter-supplementary-groups '("seat" "video"))
Note that this example will fail if seat group does not exist.
Configuration record for per terminal greetd daemon service.
greetd (default: greetd)The greetd package to use.
config-file-nameConfiguration file name to use for greetd daemon. Generally, autogenerated
derivation based on terminal-vt value.
log-file-nameLog file name to use for greetd daemon. Generally, autogenerated name based
on terminal-vt value.
terminal-vt (default: ‘"7"’)The VT to run on. Use of a specific VT with appropriate conflict avoidance is recommended.
terminal-switch (default: #f)Make this terminal active on start of greetd.
source-profile? (default: #t)Whether to source /etc/profile and ~/.profile, when they exist.
default-session-user (default: ‘"greeter"’)The user to use for running the greeter.
default-session-command (default: (greetd-agreety-session))Can be either instance of greetd-agreety-session configuration or
gexp->script like object to use as greeter.
Configuration record for the agreety greetd greeter.
agreety (default: greetd)The package with /bin/agreety command.
command (default: (file-append bash "/bin/bash"))Command to be started by /bin/agreety on successful login.
command-args (default: '("-l"))Command arguments to pass to command.
extra-env (default: '())Extra environment variables to set on login.
xdg-env? (default: #t)If true XDG_RUNTIME_DIR and XDG_SESSION_TYPE will be set
before starting command. One should note that, extra-env variables
are set right after mentioned variables, so that they can be overridden.
Generic configuration record for the wlgreet greetd greeter.
wlgreet (default: wlgreet)The package with the /bin/wlgreet command.
command (default: (file-append sway "/bin/sway"))Command to be started by /bin/wlgreet on successful login.
command-args (default: '())Command arguments to pass to command.
output-mode (default: "all")Option to use for outputMode in the TOML configuration file.
scale (default: 1)Option to use for scale in the TOML configuration file.
background (default: '(0 0 0 0.9))RGBA list to use as the background colour of the login prompt.
headline (default: '(1 1 1 1))RGBA list to use as the headline colour of the UI popup.
prompt (default: '(1 1 1 1))RGBA list to use as the prompt colour of the UI popup.
prompt-error (default: '(1 1 1 1))RGBA list to use as the error colour of the UI popup.
border (default: '(1 1 1 1))RGBA list to use as the border colour of the UI popup.
extra-env (default: '())Extra environment variables to set on login.
Sway-specific configuration record for the wlgreet greetd greeter.
wlgreet-session (default: (greetd-wlgreet-session))A greetd-wlgreet-session record for generic wlgreet configuration, on
top of the Sway-specific greetd-wlgreet-sway-session.
sway (default: sway)The package providing the /bin/sway command.
sway-configuration (default: #f)File-like object providing an additional Sway configuration file to be prepended to the mandatory part of the configuration.
Here is an example of a greetd configuration that uses wlgreet and Sway:
(greetd-configuration
;; We need to give the greeter user these permissions, otherwise
;; Sway will crash on launch.
(greeter-supplementary-groups (list "video" "input" "seat"))
(terminals
(list (greetd-terminal-configuration
(terminal-vt "1")
(terminal-switch #t)
(default-session-command
(greetd-wlgreet-sway-session
(sway-configuration
(local-file "sway-greetd.conf"))))))))
Next: Запланированное исполнения задач, Up: Сервисы [Contents][Index]