Próximo: Serviços de desktop, Anterior: X Window, Acima: Serviços [Conteúdo][Índice]
The (gnu services cups) module provides a Guix service definition for
the CUPS printing service. To add printer support to a Guix system, add a
cups-service to the operating system definition:
The service type for the CUPS print server. Its value should be a valid CUPS configuration (see below). To use the default settings, simply write:
(service cups-service-type)
The CUPS configuration controls the basic things about your CUPS installation: what interfaces it listens on, what to do if a print job fails, how much logging to do, and so on. To actually add a printer, you have to visit the http://localhost:631 URL, or use a tool such as GNOME’s printer configuration services. By default, configuring a CUPS service will generate a self-signed certificate if needed, for secure connections to the print server.
Suppose you want to enable the Web interface of CUPS and also add support
for Epson printers via the epson-inkjet-printer-escpr package and
for HP printers via the hplip-minimal package. You can do that
directly, like this (you need to use the (gnu packages cups) module):
(service cups-service-type
(cups-configuration
(web-interface? #t)
(extensions
(list cups-filters epson-inkjet-printer-escpr hplip-minimal))))
Nota: If you wish to use the Qt5 based GUI which comes with the hplip package then it is suggested that you install the
hplippackage, either in your OS configuration file or as your user.
The available configuration parameters follow. Each parameter definition is
preceded by its type; for example, ‘string-list foo’ indicates that the
foo parameter should be specified as a list of strings. There is
also a way to specify the configuration as a string, if you have an old
cupsd.conf file that you want to port over from some other system;
see the end for more details.
Available cups-configuration fields are:
cups-configuration parameter: package cups ¶The CUPS package.
cups-configuration parameter: package-list extensions (default: (list brlaser cups-filters epson-inkjet-printer-escpr foomatic-filters hplip-minimal splix)) ¶Drivers and other extensions to the CUPS package.
cups-configuration parameter: files-configuration files-configuration ¶Configuration of where to write logs, what directories to use for print spools, and related privileged configuration parameters.
Available files-configuration fields are:
files-configuration parameter: log-location access-log ¶Defines the access log filename. Specifying a blank filename disables
access log generation. The value stderr causes log entries to be
sent to the standard error file when the scheduler is running in the
foreground, or to the system log daemon when run in the background. The
value syslog causes log entries to be sent to the system log daemon.
The server name may be included in filenames using the string %s, as
in /var/log/cups/%s-access_log.
Defaults to ‘"/var/log/cups/access_log"’.
files-configuration parameter: file-name cache-dir ¶Where CUPS should cache data.
Defaults to ‘"/var/cache/cups"’.
files-configuration parameter: string config-file-perm ¶Specifies the permissions for all configuration files that the scheduler writes.
Note that the permissions for the printers.conf file are currently masked to only allow access from the scheduler user (typically root). This is done because printer device URIs sometimes contain sensitive authentication information that should not be generally known on the system. There is no way to disable this security feature.
Defaults to ‘"0640"’.
files-configuration parameter: log-location error-log ¶Defines the error log filename. Specifying a blank filename disables error
log generation. The value stderr causes log entries to be sent to
the standard error file when the scheduler is running in the foreground, or
to the system log daemon when run in the background. The value
syslog causes log entries to be sent to the system log daemon. The
server name may be included in filenames using the string %s, as in
/var/log/cups/%s-error_log.
Defaults to ‘"/var/log/cups/error_log"’.
files-configuration parameter: string fatal-errors ¶Specifies which errors are fatal, causing the scheduler to exit. The kind strings are:
nenhumaNo errors are fatal.
allAll of the errors below are fatal.
browseBrowsing initialization errors are fatal, for example failed connections to the DNS-SD daemon.
configConfiguration file syntax errors are fatal.
listenListen or Port errors are fatal, except for IPv6 failures on the loopback or
any addresses.
logLog file creation or write errors are fatal.
permissionsBad startup file permissions are fatal, for example shared TLS certificate and key files with world-read permissions.
Defaults to ‘"all -browse"’.
files-configuration parameter: boolean file-device? ¶Specifies whether the file pseudo-device can be used for new printer queues. The URI file:///dev/null is always allowed.
Defaults to ‘#f’.
files-configuration parameter: string group ¶Specifies the group name or ID that will be used when executing external programs.
Defaults to ‘"lp"’.
files-configuration parameter: string log-file-group ¶Specifies the group name or ID that will be used for log files.
Defaults to ‘"lpadmin"’.
files-configuration parameter: string log-file-perm ¶Specifies the permissions for all log files that the scheduler writes.
Defaults to ‘"0644"’.
files-configuration parameter: log-location page-log ¶Defines the page log filename. Specifying a blank filename disables page
log generation. The value stderr causes log entries to be sent to
the standard error file when the scheduler is running in the foreground, or
to the system log daemon when run in the background. The value
syslog causes log entries to be sent to the system log daemon. The
server name may be included in filenames using the string %s, as in
/var/log/cups/%s-page_log.
Defaults to ‘"/var/log/cups/page_log"’.
files-configuration parameter: string remote-root ¶Specifies the username that is associated with unauthenticated accesses by
clients claiming to be the root user. The default is remroot.
Defaults to ‘"remroot"’.
files-configuration parameter: file-name request-root ¶Specifies the directory that contains print jobs and other HTTP request data.
Defaults to ‘"/var/spool/cups"’.
files-configuration parameter: sandboxing sandboxing ¶Specifies the level of security sandboxing that is applied to print filters,
backends, and other child processes of the scheduler; either relaxed
or strict. This directive is currently only used/supported on macOS.
Defaults to ‘strict’.
files-configuration parameter: file-name server-keychain ¶Specifies the location of TLS certificates and private keys. CUPS will look for public and private keys in this directory: .crt files for PEM-encoded certificates and corresponding .key files for PEM-encoded private keys.
Defaults to ‘"/etc/cups/ssl"’.
files-configuration parameter: file-name server-root ¶Specifies the directory containing the server configuration files.
Defaults to ‘"/etc/cups"’.
files-configuration parameter: boolean sync-on-close? ¶Specifies whether the scheduler calls fsync(2) after writing configuration or state files.
Defaults to ‘#f’.
files-configuration parameter: space-separated-string-list system-group ¶Specifies the group(s) to use for @SYSTEM group authentication.
files-configuration parameter: file-name temp-dir ¶Specifies the directory where temporary files are stored.
Defaults to ‘"/var/spool/cups/tmp"’.
files-configuration parameter: string user ¶Specifies the user name or ID that is used when running external programs.
Defaults to ‘"lp"’.
files-configuration parameter: string set-env ¶Set the specified environment variable to be passed to child processes.
Defaults to ‘"variable value"’.
cups-configuration parameter: access-log-level access-log-level ¶Specifies the logging level for the AccessLog file. The config level
logs when printers and classes are added, deleted, or modified and when
configuration files are accessed or updated. The actions level logs
when print jobs are submitted, held, released, modified, or canceled, and
any of the conditions for config. The all level logs all
requests.
Defaults to ‘actions’.
cups-configuration parameter: boolean auto-purge-jobs? ¶Specifies whether to purge job history data automatically when it is no longer required for quotas.
Defaults to ‘#f’.
cups-configuration parameter: comma-separated-string-list browse-dns-sd-sub-types ¶Specifies a list of DNS-SD sub-types to advertise for each shared printer.
The default ‘(list "_cups" "_print" "_universal")’ tells clients that CUPS sharing, IPP Everywhere, AirPrint, and Mopria are supported.
cups-configuration parameter: browse-local-protocols browse-local-protocols ¶Specifies which protocols to use for local printer sharing.
Defaults to ‘dnssd’.
cups-configuration parameter: boolean browse-web-if? ¶Specifies whether the CUPS web interface is advertised.
Defaults to ‘#f’.
cups-configuration parameter: boolean browsing? ¶Specifies whether shared printers are advertised.
Defaults to ‘#f’.
cups-configuration parameter: default-auth-type default-auth-type ¶Specifies the default type of authentication to use.
Defaults to ‘Basic’.
cups-configuration parameter: default-encryption default-encryption ¶Specifies whether encryption will be used for authenticated requests.
Defaults to ‘Required’.
cups-configuration parameter: string default-language ¶Specifies the default language to use for text and web content.
Defaults to ‘"en"’.
cups-configuration parameter: string default-paper-size ¶Specifies the default paper size for new print queues. ‘"Auto"’ uses a locale-specific default, while ‘"None"’ specifies there is no default paper size. Specific size names are typically ‘"Letter"’ or ‘"A4"’.
Defaults to ‘"Auto"’.
cups-configuration parameter: string default-policy ¶Specifies the default access policy to use.
Defaults to ‘"default"’.
Specifies whether local printers are shared by default.
Defaults to ‘#t’.
cups-configuration parameter: non-negative-integer dirty-clean-interval ¶Specifies the delay for updating of configuration and state files, in seconds. A value of 0 causes the update to happen as soon as possible, typically within a few milliseconds.
Defaults to ‘30’.
cups-configuration parameter: error-policy error-policy ¶Specifies what to do when an error occurs. Possible values are
abort-job, which will discard the failed print job; retry-job,
which will retry the job at a later time; retry-current-job, which
retries the failed job immediately; and stop-printer, which stops the
printer.
Defaults to ‘stop-printer’.
cups-configuration parameter: non-negative-integer filter-limit ¶Specifies the maximum cost of filters that are run concurrently, which can be used to minimize disk, memory, and CPU resource problems. A limit of 0 disables filter limiting. An average print to a non-PostScript printer needs a filter limit of about 200. A PostScript printer needs about half that (100). Setting the limit below these thresholds will effectively limit the scheduler to printing a single job at any time.
Defaults to ‘0’.
cups-configuration parameter: non-negative-integer filter-nice ¶Specifies the scheduling priority of filters that are run to print a job. The nice value ranges from 0, the highest priority, to 19, the lowest priority.
Defaults to ‘0’.
cups-configuration parameter: host-name-lookups host-name-lookups ¶Specifies whether to do reverse lookups on connecting clients. The
double setting causes cupsd to verify that the hostname
resolved from the address matches one of the addresses returned for that
hostname. Double lookups also prevent clients with unregistered addresses
from connecting to your server. Only set this option to #t or
double if absolutely required.
Defaults to ‘#f’.
cups-configuration parameter: non-negative-integer job-kill-delay ¶Specifies the number of seconds to wait before killing the filters and backend associated with a canceled or held job.
Defaults to ‘30’.
cups-configuration parameter: non-negative-integer job-retry-interval ¶Specifies the interval between retries of jobs in seconds. This is
typically used for fax queues but can also be used with normal print queues
whose error policy is retry-job or retry-current-job.
Defaults to ‘30’.
cups-configuration parameter: non-negative-integer job-retry-limit ¶Specifies the number of retries that are done for jobs. This is typically
used for fax queues but can also be used with normal print queues whose
error policy is retry-job or retry-current-job.
Defaults to ‘5’.
cups-configuration parameter: boolean keep-alive? ¶Specifies whether to support HTTP keep-alive connections.
Defaults to ‘#t’.
cups-configuration parameter: non-negative-integer limit-request-body ¶Specifies the maximum size of print files, IPP requests, and HTML form data. A limit of 0 disables the limit check.
Defaults to ‘0’.
cups-configuration parameter: multiline-string-list listen ¶Listens on the specified interfaces for connections. Valid values are of
the form address:port, where address is either an IPv6
address enclosed in brackets, an IPv4 address, or * to indicate all
addresses. Values can also be file names of local UNIX domain sockets. The
Listen directive is similar to the Port directive but allows you to restrict
access to specific interfaces or networks.
cups-configuration parameter: location-access-control-list location-access-controls ¶Specifies a set of additional access controls.
Available location-access-controls fields are:
location-access-controls parameter: file-name path ¶Specifies the URI path to which the access control applies.
location-access-controls parameter: access-control-list access-controls ¶Access controls for all access to this path, in the same format as the
access-controls of operation-access-control.
Defaults to ‘'()’.
location-access-controls parameter: method-access-control-list method-access-controls ¶Access controls for method-specific access to this path.
Defaults to ‘'()’.
Available method-access-controls fields are:
method-access-controls parameter: boolean reverse? ¶If #t, apply access controls to all methods except the listed
methods. Otherwise apply to only the listed methods.
Defaults to ‘#f’.
method-access-controls parameter: method-list methods ¶Methods to which this access control applies.
Defaults to ‘'()’.
method-access-controls parameter: access-control-list access-controls ¶Access control directives, as a list of strings. Each string should be one directive, such as ‘"Order allow,deny"’.
Defaults to ‘'()’.
cups-configuration parameter: non-negative-integer log-debug-history ¶Specifies the number of debugging messages that are retained for logging if an error occurs in a print job. Debug messages are logged regardless of the LogLevel setting.
Defaults to ‘100’.
cups-configuration parameter: log-level log-level ¶Specifies the level of logging for the ErrorLog file. The value none
stops all logging while debug2 logs everything.
Defaults to ‘info’.
cups-configuration parameter: log-time-format log-time-format ¶Specifies the format of the date and time in the log files. The value
standard logs whole seconds while usecs logs microseconds.
Defaults to ‘standard’.
cups-configuration parameter: non-negative-integer max-clients ¶Specifies the maximum number of simultaneous clients that are allowed by the scheduler.
Defaults to ‘100’.
cups-configuration parameter: non-negative-integer max-clients-per-host ¶Specifies the maximum number of simultaneous clients that are allowed from a single address.
Defaults to ‘100’.
cups-configuration parameter: non-negative-integer max-copies ¶Specifies the maximum number of copies that a user can print of each job.
Defaults to ‘9999’.
cups-configuration parameter: non-negative-integer max-hold-time ¶Specifies the maximum time a job may remain in the indefinite hold
state before it is canceled. A value of 0 disables cancellation of held
jobs.
Defaults to ‘0’.
cups-configuration parameter: non-negative-integer max-jobs ¶Specifies the maximum number of simultaneous jobs that are allowed. Set to 0 to allow an unlimited number of jobs.
Defaults to ‘500’.
cups-configuration parameter: non-negative-integer max-jobs-per-printer ¶Specifies the maximum number of simultaneous jobs that are allowed per
printer. A value of 0 allows up to max-jobs per printer.
Defaults to ‘0’.
cups-configuration parameter: non-negative-integer max-jobs-per-user ¶Specifies the maximum number of simultaneous jobs that are allowed per
user. A value of 0 allows up to max-jobs per user.
Defaults to ‘0’.
cups-configuration parameter: non-negative-integer max-job-time ¶Specifies the maximum time a job may take to print before it is canceled, in seconds. Set to 0 to disable cancellation of “stuck” jobs.
Defaults to ‘10800’.
cups-configuration parameter: non-negative-integer max-log-size ¶Specifies the maximum size of the log files before they are rotated, in bytes. The value 0 disables log rotation.
Defaults to ‘1048576’.
cups-configuration parameter: non-negative-integer max-subscriptions ¶Specifies the maximum number of simultaneous event subscriptions that are allowed. Set to ‘0’ to allow an unlimited number of subscriptions.
Defaults to ‘0’.
cups-configuration parameter: non-negative-integer max-subscriptions-per-job ¶Specifies the maximum number of simultaneous event subscriptions that are
allowed per job. A value of ‘0’ allows up to max-subscriptions
per job.
Defaults to ‘0’.
cups-configuration parameter: non-negative-integer max-subscriptions-per-printer ¶Specifies the maximum number of simultaneous event subscriptions that are
allowed per printer. A value of ‘0’ allows up to
max-subscriptions per printer.
Defaults to ‘0’.
cups-configuration parameter: non-negative-integer max-subscriptions-per-user ¶Specifies the maximum number of simultaneous event subscriptions that are
allowed per user. A value of ‘0’ allows up to max-subscriptions
per user.
Defaults to ‘0’.
cups-configuration parameter: non-negative-integer multiple-operation-timeout ¶Specifies the maximum amount of time to allow between files in a multiple file print job, in seconds.
Defaults to ‘900’.
cups-configuration parameter: environment-variables environment-variables ¶Passes the specified environment variable(s) to child processes; a list of strings.
Defaults to ‘'()’.
cups-configuration parameter: policy-configuration-list policies ¶Specifies named access control policies.
Available policy-configuration fields are:
policy-configuration parameter: string name ¶Name of the policy.
policy-configuration parameter: string job-private-access ¶Specifies an access list for a job’s private values. @ACL maps to
the printer’s requesting-user-name-allowed or requesting-user-name-denied
values. @OWNER maps to the job’s owner. @SYSTEM maps to
the groups listed for the system-group field of the
files-configuration, which is reified into the
cups-files.conf(5) file. Other possible elements of the access list
include specific user names, and @group to indicate members of
a specific group. The access list may also be simply all or
default.
Defaults to ‘"@OWNER @SYSTEM"’.
policy-configuration parameter: string job-private-values ¶Specifies the list of job values to make private, or all,
default, or none.
Defaults to ‘"job-name job-originating-host-name job-originating-user-name phone"’.
policy-configuration parameter: string subscription-private-access ¶Specifies an access list for a subscription’s private values. @ACL
maps to the printer’s requesting-user-name-allowed or
requesting-user-name-denied values. @OWNER maps to the job’s
owner. @SYSTEM maps to the groups listed for the
system-group field of the files-configuration, which is
reified into the cups-files.conf(5) file. Other possible elements of
the access list include specific user names, and @group to
indicate members of a specific group. The access list may also be simply
all or default.
Defaults to ‘"@OWNER @SYSTEM"’.
policy-configuration parameter: string subscription-private-values ¶Specifies the list of job values to make private, or all,
default, or none.
Defaults to ‘"notify-events notify-pull-method notify-recipient-uri notify-subscriber-user-name notify-user-data"’.
policy-configuration parameter: operation-access-control-list access-controls ¶Access control by IPP operation.
Defaults to ‘'()’.
cups-configuration parameter: boolean-or-non-negative-integer preserve-job-files ¶Specifies whether job files (documents) are preserved after a job is printed. If a numeric value is specified, job files are preserved for the indicated number of seconds after printing. Otherwise a boolean value applies indefinitely.
Defaults to ‘86400’.
cups-configuration parameter: boolean-or-non-negative-integer preserve-job-history ¶Specifies whether the job history is preserved after a job is printed. If a
numeric value is specified, the job history is preserved for the indicated
number of seconds after printing. If #t, the job history is
preserved until the MaxJobs limit is reached.
Defaults to ‘#t’.
cups-configuration parameter: comma-separated-string-list-or-#f ready-paper-sizes ¶Specifies a list of potential paper sizes that are reported as ready, that is: loaded. The actual list will contain only the sizes that each printer supports.
The default value of #f is a special case: CUPS will use ‘(list
\"Letter\" \"Legal\" \"Tabloid\" \"4x6\" \"Env10\")’ if the default paper
size is \"Letter\", and ‘(list \"A3\" \"A4\" \"A5\" \"A6\" \"EnvDL\")’
otherwise.
cups-configuration parameter: non-negative-integer reload-timeout ¶Specifies the amount of time to wait for job completion before restarting the scheduler.
Defaults to ‘30’.
cups-configuration parameter: string server-admin ¶Specifies the email address of the server administrator.
Defaults to ‘"root@localhost.localdomain"’.
cups-configuration parameter: host-name-list-or-* server-alias ¶The ServerAlias directive is used for HTTP Host header validation when
clients connect to the scheduler from external interfaces. Using the
special name * can expose your system to known browser-based DNS
rebinding attacks, even when accessing sites through a firewall. If the
auto-discovery of alternate names does not work, we recommend listing each
alternate name with a ServerAlias directive instead of using *.
Defaults to ‘*’.
cups-configuration parameter: string server-name ¶Specifies the fully-qualified host name of the server.
Defaults to ‘"localhost"’.
cups-configuration parameter: server-tokens server-tokens ¶Specifies what information is included in the Server header of HTTP
responses. None disables the Server header. ProductOnly
reports CUPS. Major reports CUPS 2. Minor
reports CUPS 2.0. Minimal reports CUPS 2.0.0.
OS reports CUPS 2.0.0 (uname) where uname is the
output of the uname command. Full reports CUPS 2.0.0
(uname) IPP/2.0.
Defaults to ‘Minimal’.
cups-configuration parameter: multiline-string-list ssl-listen ¶Listens on the specified interfaces for encrypted connections. Valid values
are of the form address:port, where address is either an
IPv6 address enclosed in brackets, an IPv4 address, or * to indicate
all addresses.
Defaults to ‘'()’.
cups-configuration parameter: ssl-options ssl-options ¶Sets encryption options. By default, CUPS only supports encryption using
TLS v1.0 or higher using known secure cipher suites. Security is reduced
when Allow options are used, and enhanced when Deny options
are used. The AllowRC4 option enables the 128-bit RC4 cipher suites,
which are required for some older clients. The AllowSSL3 option
enables SSL v3.0, which is required for some older clients that do not
support TLS v1.0. The DenyCBC option disables all CBC cipher
suites. The DenyTLS1.0 option disables TLS v1.0 support - this sets
the minimum protocol version to TLS v1.1.
Defaults to ‘'()’.
cups-configuration parameter: boolean strict-conformance? ¶Specifies whether the scheduler requires clients to strictly adhere to the IPP specifications.
Defaults to ‘#f’.
cups-configuration parameter: non-negative-integer timeout ¶Specifies the HTTP request timeout, in seconds.
Defaults to ‘900’.
cups-configuration parameter: boolean web-interface? ¶Specifies whether the web interface is enabled.
Defaults to ‘#f’.
At this point you’re probably thinking “oh dear, Guix manual, I like you
but you can stop already with the configuration options”. Indeed.
However, one more point: it could be that you have an existing
cupsd.conf that you want to use. In that case, you can pass an
opaque-cups-configuration as the configuration of a
cups-service-type.
Available opaque-cups-configuration fields are:
opaque-cups-configuration parameter: package cups ¶The CUPS package.
opaque-cups-configuration parameter: string cupsd.conf ¶The contents of the cupsd.conf, as a string.
opaque-cups-configuration parameter: string cups-files.conf ¶The contents of the cups-files.conf file, as a string.
For example, if your cupsd.conf and cups-files.conf are in
strings of the same name, you could instantiate a CUPS service like this:
(service cups-service-type
(opaque-cups-configuration
(cupsd.conf cupsd.conf)
(cups-files.conf cups-files.conf)))
Próximo: Serviços de desktop, Anterior: X Window, Acima: Serviços [Conteúdo][Índice]