This section describes how to install Guix on an arbitrary system from a self-contained tarball providing binaries for Guix and for all its dependencies. This is often quicker than installing from source, which is described in the next sections. The only requirement is to have GNU tar and Xz.
Note: We recommend the use of this shell installer script. The script automates the download, installation, and initial configuration steps described below. It should be run as the root user. As root, you can thus run this:cd /tmp wget https://git.savannah.gnu.org/cgit/guix.git/plain/etc/guix-install.sh chmod +x guix-install.sh ./guix-install.sh
If you’re running Debian or a derivative such as Ubuntu, you can instead install the package (it might be a version older than 9c3a2ab but you can update it afterwards by running ‘guix pull’):sudo apt install guix
Likewise on openSUSE:sudo zypper install guix
When you’re done, see Application Setup for extra configuration you might need, and Getting Started for your first steps!
Installing goes along these lines:
x86_64-linuxcan be replaced with
i686(32-bits) machine already running the kernel Linux, and so on (see GNU Distribution).
Make sure to download the associated .sig file and to verify the authenticity of the tarball against it, along these lines:
$ wget https://ftp.gnu.org/gnu/guix/guix-binary-9c3a2ab.x86_64-linux.tar.xz.sig $ gpg --verify guix-binary-9c3a2ab.x86_64-linux.tar.xz.sig
If that command fails because you do not have the required public key, then run this command to import it:
$ wget 'https://sv.gnu.org/people/viewgpg.php?user_id=15145' \ -qO - | gpg --import -
and rerun the
gpg --verify command.
Take note that a warning like “This key is not certified with a trusted signature!” is normal.
rootuser. Depending on your distribution, you may have to run
sudo -i. As
# cd /tmp # tar --warning=no-timestamp -xf \ /path/to/guix-binary-9c3a2ab.x86_64-linux.tar.xz # mv var/guix /var/ && mv gnu /
This creates /gnu/store (see The Store) and /var/guix.
The latter contains a ready-to-use profile for
root (see next
Do not unpack the tarball on a working Guix system since that would overwrite its own essential files.
The --warning=no-timestamp option makes sure GNU tar does not emit warnings about “implausibly old time stamps” (such warnings were triggered by GNU tar 1.26 and older; recent versions are fine). They stem from the fact that all the files in the archive have their modification time set to 1 (which means January 1st, 1970). This is done on purpose to make sure the archive content is independent of its creation time, thus making it reproducible.
guix pullwill install updates (see Invoking guix pull):
# mkdir -p ~root/.config/guix # ln -sf /var/guix/profiles/per-user/root/current-guix \ ~root/.config/guix/current
Source etc/profile to augment
PATH and other relevant
# GUIX_PROFILE="`echo ~root`/.config/guix/current" ; \ source $GUIX_PROFILE/etc/profile
If your host distro uses the systemd init system, this can be achieved with these commands:
# cp ~root/.config/guix/current/lib/systemd/system/gnu-store.mount \ ~root/.config/guix/current/lib/systemd/system/guix-daemon.service \ /etc/systemd/system/ # systemctl enable --now gnu-store.mount guix-daemon
You may also want to arrange for
guix gc to run periodically:
# cp ~root/.config/guix/current/lib/systemd/system/guix-gc.service \ ~root/.config/guix/current/lib/systemd/system/guix-gc.timer \ /etc/systemd/system/ # systemctl enable --now guix-gc.timer
You may want to edit guix-gc.service to adjust the command line options to fit your needs (see Invoking guix gc).
If your host distro uses the Upstart init system:
# initctl reload-configuration # cp ~root/.config/guix/current/lib/upstart/system/guix-daemon.conf \ /etc/init/ # start guix-daemon
Otherwise, you can still start the daemon manually with:
# ~root/.config/guix/current/bin/guix-daemon \ --build-users-group=guixbuild
guixcommand available to other users on the machine, for instance with:
# mkdir -p /usr/local/bin # cd /usr/local/bin # ln -s /var/guix/profiles/per-user/root/current-guix/bin/guix
It is also a good idea to make the Info version of this manual available there:
# mkdir -p /usr/local/share/info # cd /usr/local/share/info # for i in /var/guix/profiles/per-user/root/current-guix/share/info/* ; do ln -s $i ; done
That way, assuming /usr/local/share/info is in the search path,
info guix will open this manual (see Other Info
Directories in GNU Texinfo, for more details on changing the
Info search path).
bordeaux.guix.gnu.orgor a mirror (see Substitutes), authorize them:
# guix archive --authorize < \ ~root/.config/guix/current/share/guix/ci.guix.gnu.org.pub # guix archive --authorize < \ ~root/.config/guix/current/share/guix/bordeaux.guix.gnu.org.pub
Note: If you do not enable substitutes, Guix will end up building everything from source on your machine, making each installation and upgrade very expensive. See On Trusting Binaries, for a discussion of reasons why one might want do disable substitutes.
Voilà, the installation is complete!
You can confirm that Guix is working by installing a sample package into the root profile:
# guix install hello
The binary installation tarball can be (re)produced and verified simply by running the following command in the Guix source tree:
... which, in turn, runs:
guix pack -s system --localstatedir \ --profile-name=current-guix guix
See Invoking guix pack, for more info on this handy tool.