Packages — P (Page 8 of 31)

Packages menu:

Browse alphabetically

0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

perl-test-most 0.35

This module provides the most commonly used testing functions, along with automatically turning on strict and warning and gives a bit more fine-grained control over test suites. …

perl-test-needs 0.002005

`Test::Needs' allows you to skip test scripts if modules are not available. The requested modules will be loaded, and optionally have their versions checked. If the module is missing, the…

perl-test-notabs 2.02

`Test::NoTabs' lets you check the presence of tabs in your perl code. …

perl-test-nowarnings 1.04

This modules causes any warnings during testing to be captured and stored. It automatically adds an extra test that will run when your script ends to check that there were no…

perl-test-number-delta 1.06

At some point or another, most programmers find they need to compare floating-point numbers for equality. The typical idiom is to test if the absolute value of the difference of the…

perl-test-object 0.08

In situations where you have deep trees of classes, there is a common situation in which you test a module 4 or 5 subclasses down, which should follow the correct behaviour of…

perl-test-output 1.031

Test::Output provides a simple interface for testing output sent to STDOUT or STDERR. A number of different utilities are included to try and be as flexible as possible to the tester. …

perl-test-perltidy 20130104

Using `Test::PerlTidy', any file ending in .pl, .pm, .t or .PL will cause a test fail unless it is exactly as `perltidy' would like it to be. …

perl-test-pod 1.52

Check POD files for errors or warnings in a test file, using Pod::Simple to do the heavy lifting. …

perl-test-pod-coverage 1.10

This module adds a test to your Perl distribution which checks for pod coverage of all appropriate files. …

perl-test-requires 0.10

Test::Requires checks to see if the module can be loaded. If this fails, then rather than failing tests this skips all tests. …

perl-test-requiresinternet 0.05

This Perl module is intended to easily test network connectivity to non-local Internet resources before functional tests begin. If the sockets cannot connect to the specified hosts and ports, the exception…

perl-test-roo 1.004

Test::Roo provides composable, reusable tests with roles. …

perl-test-runvalgrind 0.2.1

Test::RunValgind checks weather Valgrind does not detect errors (such as memory leaks) in an arbitrary binary executable. …

perl-test-script 1.20

The intent of the Test::Script module is to provide a series of basic tests for 80% of the testing you will need to do for scripts in the script (or bin…

perl-test-sharedfork 0.35

Test::SharedFork is a utility module for Test::Builder. It makes fork(2) safe to use in test cases. …

perl-test-simple 1.302172

Test::Simple contains basic utilities for writing tests. …

perl-test-subcalls 1.10

There are a number of different situations (like testing caching code) where you want to want to do a number of tests, and then verify that some underlying subroutine deep within the…

perl-test-taint 1.06

Tainted data is data that comes from an unsafe source, such as the command line, or, in the case of web apps, any `GET' or `POST' transactions. Read the `perlsec' man…

perl-test-tcp 2.21

Test::TCP is test utilities for TCP/IP programs. …

perl-test-tester 0.109

Test::Tester allows testing of test modules based on Test::Builder with a minimum of effort. …

perl-test-trailingspace 0.0301

Test::TrailingSpace tests for trailing spaces in Perl source files. …

perl-test-trap 0.3.4

This module is primarily (but not exclusively) for use in test scripts: A block eval configurable and extensible but by default trapping STDOUT, STDERR, warnings, exceptions, would-be exit codes, and return values…

perl-test-utf8 1.01

This module is a collection of tests useful for dealing with UTF-8 strings in Perl. This module has two types of tests: The validity tests check if a string is valid…

perl-test-version 2.09

`Test::Version' checks to ensure that all modules have a version defined, and that the version is valid. …

perl-test-warn 0.30

This module provides a few convenience methods for testing warning based code. …

perl-test-warnings 0.026

This module is intended to be used as a drop-in replacement for Test::NoWarnings. It also adds an extra test, but runs this test before done_testing calculates the test count, rather than…

perl-test-without-module 0.20

This module allows you to deliberately hide modules from a program even though they are installed. This is mostly useful for testing modules that have a fallback when a certain dependency…

perl-test-writevariants 0.014

The Test::WriteVariants module provides for the dynamic generation of tests in nested combinations of contexts. …

perl-test-www-mechanize 1.52

Test::WWW::Mechanize is a subclass of the Perl module WWW::Mechanize that incorporates features for web application testing. …

perl-test-www-mechanize-catalyst 0.62

The Test::WWW::Mechanize::Catalyst module meshes the Test::WWW:Mechanize module and the Catalyst web application framework to allow testing of Catalyst applications without needing to start up a web server. …

perl-test-www-mechanize-psgi 0.38

PSGI is a specification to decouple web server environments from web application framework code. Test::WWW::Mechanize is a subclass of WWW::Mechanize that incorporates features for web application testing. The Test::WWW::Mechanize::PSGI module meshes…

perl-test-yaml 1.07

Test::YAML is a subclass of Test::Base with YAML specific support. …

perl-test2-plugin-nowarnings 0.06

Loading this plugin causes your tests to fail if there any warnings while they run. Each warning generates a new failing test and the warning content is outputted via diag. …

perl-test2-suite 0.000072

This package provides a rich set of tools, plugins, bundles, etc built upon the Test2 testing library. …

perl-text-aligner 0.13

Text::Aligner exports a single function, align(), which is used to justify strings to various alignment styles. …

perl-text-balanced 2.03

The Text::Balanced module can be used to extract delimited text sequences from strings. …

perl-text-bibtex 0.85

`Text::BibTeX' is a Perl library for reading, parsing, and processing BibTeX files. `Text::BibTeX' gives you access to the data at many different levels: you may work with BibTeX entries as simple…

perl-text-csv 2.00

Text::CSV provides facilities for the composition and decomposition of comma-separated values. An instance of the Text::CSV class can combine fields into a CSV string and parse a CSV string into fields. …

perl-text-csv-xs 1.44

`Text::CSV_XS' provides facilities for the composition and decomposition of comma-separated values. An instance of the `Text::CSV_XS' class will combine fields into a CSV string and parse a CSV string into fields.…

perl-text-diff 1.45

Text::Diff provides a basic set of services akin to the GNU diff utility. It is not anywhere near as feature complete as GNU diff, but it is better integrated with Perl…

perl-text-format 0.61

This package provides functions to format text in various ways like centering, paragraphing, and converting tabs to spaces and spaces to tabs. …

perl-text-german 0.06

This module is a rather incomplete implementation of work done by Gudrun Putze-Meier. …

perl-text-glob 0.11

Text::Glob implements glob(3) style matching that can be used to match against text, rather than fetching names from a file system. If you want to do full file globbing use the…

perl-text-haml 0.990118

Text::Haml implements Haml `http://haml.info/docs/yardoc/file.REFERENCE.html' specification. …

perl-text-markdown-discount 0.11

Text::Markdown::Discount is a Perl extension to the Discount markdown implementation. use Text::Markdown::Discount; my $html = markdown($text) …

perl-text-neattemplate 0.1101

Text::NeatTemplate provides a simple, middleweight but fast template engine, for when you need speed rather than complex features, yet need more features than simple variable substitution. …

perl-text-patch 1.8

Text::Patch combines source text with given diff (difference) data. Diff data is produced by Text::Diff module or by the standard `diff' utility. …

perl-text-roman 3.5

This package provides functions to convert between Roman and Arabic algorisms. It supports both conventional Roman algorisms (which range from 1 to 3999) and Milhar Romans, a variation which uses a bar…

perl-text-simpletable 2.07

Text::SimpleTable draws simple ASCII tables. …

perl-text-table 1.133

Text::Table renders plaintext tables. …

perl-text-template 1.55

This is a library for generating letters, building HTML pages, or filling in templates generally. A template is a piece of text that has little Perl programs embedded in it here…

perl-text-unidecode 1.30

Text::Unidecode provides a function, unidecode(...) that takes Unicode data and tries to represent it in US-ASCII characters (i.e., the universally displayable characters between 0x00 and 0x7F). The representation is almost always…

perl-threads 2.21

This module exposes interpreter threads to the Perl level. …

perl-throwable 0.200013

Throwable is a role for classes that are meant to be thrown as exceptions to standard program flow. …

perl-tie-cycle 1.225

You use `Tie::Cycle' to go through a list over and over again. Once you get to the end of the list, you go back to the beginning. …

perl-tie-handle-offset 0.004

This modules provides a file handle that hides the beginning of a file, by modifying the `seek()' and `tell()' calls. …

perl-tie-ixhash 1.23

This Perl module implements Perl hashes that preserve the order in which the hash elements were added. The order is not affected when values corresponding to existing keys in the IxHash…

perl-tie-simple 1.04

This module adds the ability to quickly create new types of tie objects without creating a complete class. It does so in such a way as to try and make…

perl-tie-toobject 0.03

This class provides a tie constructor that returns the object it was given as it's first argument. This way side effects of calling $object->TIEHASH are avoided. …

perl-time-duration 1.21

This module provides functions for expressing durations in rounded or exact terms. …

perl-time-duration-parse 0.14

Time::Duration::Parse is a module to parse human readable duration strings like "2 minutes" and "3 seconds" to seconds. …

perl-time-hires 1.9764

This package implements `usleep', `ualarm', and `gettimeofday' for Perl, as well as wrappers to implement `time', `sleep', and `alarm' that know about non-integral seconds. …

perl-time-local 1.28

This module provides functions that are the inverse of built-in perl functions localtime() and gmtime(). They accept a date as a six-element array, and return the corresponding time(2) value in seconds…

perl-time-mock 0.0.2

This module allows you to speed up your sleep(), alarm(), and time() calls. …

perl-time-piece 1.3203

This module replaces the standard `localtime' and `gmtime' functions with implementations that return objects. It does so in a backwards-compatible manner, so that using these functions as documented will still work…

perl-timedate 2.33

This module provides routines for parsing date string into time values and formatting dates into ASCII strings. …

perl-tk 804.034

Tk is a Graphical User Interface ToolKit. …

perl-tree-simple 1.33

This module in a fully object-oriented implementation of a simple n-ary tree. …

perl-tree-simple-visitorfactory 0.15

This module is a factory for dispensing Tree::Simple::Visitor::* objects. …

perl-tree-xpathengine 0.05

This module provides an XPath engine, that can be re-used by other module/classes that implement trees. It is designed to be compatible with `Class::XPath', ie it passes its tests if you…

perl-try-tiny 0.30

This module provides bare bones try/catch/finally statements that are designed to minimize common mistakes with eval blocks, and nothing else. …

perl-type-tie 0.014

This module exports a single function: `ttie'. It ties a variable to a type constraint, ensuring that whatever values stored in the variable will conform to the type constraint. If…

perl-type-tiny 1.008003

`Type::Tiny' is a small class for writing type constraints, inspired by Moose's type constraint API. It has only one non-core dependency (and even that is simply a module that was previously…

perl-type-tiny-xs 0.014

This module is optionally used by `Type::Tiny' to provide faster, C-based implementations of some type constraints. This package has only core dependencies, and does not depend on `Type::Tiny', so other data…

perl-types-path-tiny 0.006

This module provides `Path::Tiny' types for Moose, Moo, etc. It handles two important types of coercion: coercing objects with overloaded stringification, and coercing to absolute paths. It also can check…

perl-types-serialiser 1.0

This module provides some extra datatypes that are used by common serialisation formats such as JSON or CBOR. …

perl-unicode-collate 1.27

This package provides tools for sorting and comparing Unicode data. …

perl-unicode-linebreak 2019.001

`Unicode::LineBreak' implements the line breaking algorithm described in Unicode Standard Annex #14. The `East_Asian_Width' property defined by Annex #11 is used to determine breaking positions. …

perl-unicode-normalize 1.26

This Perl module provides Unicode normalization forms. …

perl-unicode-utf8 0.62

This module provides functions to encode and decode UTF-8 encoding form as specified by Unicode and ISO/IEC 10646:2011. …

perl-universal-can 1.20140328

This module attempts to work around people calling UNIVERSAL::can() as a function, which it is not. …

perl-universal-isa 1.20171012

This module attempts to recover from people calling UNIVERSAL::isa as a function. …

perl-universal-require 0.18

This module lets you require other modules where the module name is in a variable, something you can't do with the `require' built-in. …

perl-uri 1.76

The URI module implements the URI class. Objects of this class represent "Uniform Resource Identifier references" as specified in RFC 2396 and updated by RFC 2732. …

perl-uri-db 0.19

This module defines a format for database URIs, and provides a {URI …

perl-uri-escape 1.76

This module provides functions to percent-encode and percent-decode URI strings as defined by RFC 3986. Percent-encoding URI's is informally called URI escaping. This is the terminology used by this module,…

perl-uri-fetch 0.13

`URI::Fetch' is a smart client for fetching HTTP pages, notably syndication feeds (RSS, Atom, and others), in an intelligent, bandwidth- and time-saving way. …

perl-uri-find 20160806

This module finds URIs and URLs (according to what URI.pm considers a URI) in plain text. It only finds URIs which include a scheme (http:// or the like), for something a…

perl-uri-nested 0.10

`URI::Nested' provides support for nested URIs, where the scheme is a prefix, and the remainder of the URI is another URI. …

perl-uri-template 0.24

This perl module provides a wrapper around URI templates as described in RFC 6570. …

perl-uri-ws 0.03

With this module, the URI package provides the same set of methods for WebSocket URIs as it does for HTTP URIs. …

perl-variable-magic 0.62

Magic is Perl's way of enhancing variables. This mechanism lets the user add extra data to any variable and hook syntactical operations (such as access, assignment or destruction) that can be…

perl-webservice-musicbrainz 1.0.5

This module searches the MusicBrainz database through their web service at `musicbrainz.org'. …

perl-www-curl 4.17

This is a Perl extension interface for the libcurl file downloading library. …

perl-www-mechanize 1.91

WWW::Mechanize is a Perl module for stateful programmatic web browsing, used for automating interaction with websites. …

perl-www-opensearch 0.17

`WWW::OpenSearch' is a module to search http://opensearch.a9.com (A9's OpenSearch) compatible search engines. …

perl-www-robotrules 6.02

The WWW::RobotRules module parses /robots.txt files as specified in "A Standard for Robot Exclusion", at <http://www.robotstxt.org/wc/norobots.html>. Webmasters can use the /robots.txt file to forbid conforming robots from accessing parts of their web…

perl-x11-protocol 0.56

X11::Protocol is a client-side interface to the X11 Protocol, allowing perl programs to display windows and graphics on X11 servers. …

perl-x11-protocol-other 31

`X11::Protocol::Other' contains window manager related functions for use by client programs, as per the "ICCCM" (Inter-Client Communication Conventions Manual) and some of the "EWMH" (Extended Window Manager Hints). …

Packages menu:

Browse alphabetically

0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z